(800) tms-coax ? www.timesmicrowave.com 12 times microwave systems lmr ? -200 flexible low loss communications coax ideal for ? jumper assemblies in wireless communications systems ? short antenna feeder runs ? any application (e.g. wll, gps, lmr, wlan, wisp, wimax, scada, mobile antennas) requiring an easily routed, low loss rf cable ? lmr ? standard is a uv resistant polyethylene jacketed cable designed for 20-year service outdoor use. the bending and handling characteristics are signifcantly better than air-dielectric and corrugated hard-line cables. ? lmr ? - db is identical to standard lmr plus has the advantage of being watertight. the addition of waterproofng compound in and around the foil/braid insures continuous reliable service should the jacket be inadvertently damaged during installation or in the future. ? lmr ? - fr is a non-halogen (non-toxic), low smoke, fre retardant cable designed for in-building runs that can be routed anywhere except air handling plenums. lmr-fr is ul/nec & csa ratedcmr and ft4 respectively, meets faa far25 requirements and is msha-p for mining applications. ? lmr ? - fr-pvc is a general-purpose indoor cable and has a ul/nec & csa rating of cmr and ft4 respectively. it is less expensive than lmr-fr, however it emits toxic fumes (hcl) and greater smoke density when burned. ? lmr ? - pvc is designed for low loss general-purpose applications and is somewhat more flexible than the standard polyethylene jacketed lmr. ? lmr ? - pvc-w is a white-jacketed version of lmr- p v c f o r m a r i n e a n d o t h e r a p p l i c a t i o n s where color compatibility is desired. ? lmr ? - ma is a fexible cable designed specifcally for mobile antenna applications. it has a pvc jacket and un-bonded aluminum tape to facilitate end stripping with automated equipment. ? low loss is another hallmark feature of LMR-200. size for size lmr has the lowest loss of any fexible cable and comparable loss to semirigid hard-line cables. ? rf shielding is 50 db greater than typical single shielded coax (40 db). the multi-ply bonded foil outer conductor is rated conservatively at > 90 db (i.e. >180 db between two adjacent cables). ? weatherability : LMR-200 cables designed for outdoor exposure incorporate the best materials for uv resistance and have life expectancy in excess of 20 years. ? connectors : a wide variety of connectors are available for LMR-200 cable, including all common interface types, reverse polarity, and a choice of solder or non-solder center pins. most lmr connectors employ crimp outer attachment using standard hex crimp sizes. ? cable assemblies : all LMR-200 cable types are available as pre-terminated cable assemblies. refer to the section on flextech for further details. ? flexibility and bendability are hallmarks of the lmr- 200 cable design. the fexible outer conductor enables the tightest bend radius available for any cable of similar size and performance. lmr 600 LMR-200 construction specifcations description material in. (mm) inner conductor solid bc 0.044 (1.12) dielectric foam pe 0.116 (2.95) outer conductor aluminum tape 0.121 (3.07) overall braid tinned copper 0.144 (3.66) jacket (see table above) 0.195 (4.95) part description stock part number application jacket color code LMR-200 outdoor pe black 54022 LMR-200-db outdoor/watertight pe black 54089 LMR-200-fr indoor/outdoor riser cmr frpe black 54028 LMR-200-fr-pvc indoor/outdoorriser cmr frpvc black 54125 LMR-200-pvc general purpose pvc black 54216 LMR-200-pvc-w general purpose pvc white 54201 LMR-200-ma mobile antennas pvc black 54045
(800) tms-coax ? www.timesmicrowave.com 13 times microwave systems mechanical specifcations performance property units us (metric) bend radius: installation in. (mm) 0.5 (12.7) bend radius: repeated in. (mm) 2 (50.8) bending moment ft-lb (n-m) 0.2 (0.27) weight lb/ft (kg/m) 0.022 (0.03) tensile strength lb (kg) 40 (48) flat plate crush lb/in. (kg/mm) 15 (0.27) electrical specifcations performance property units us (metric) velocity of propagation % 83 dielectric constant na 1.45 time delay ns/ft (ns/m) 1.22 (4.02) impedance ohms 50 capacitance pf/ft (pf/m) 24.5 (80.3) inductance uh/ft (uh/m) 0.061 (0.20) shielding effectiveness db >90 dc resistance inner conductor ohms/1000ft (/km) 5.36 (17.6) outer conductor ohms/1000ft (/km) 4.9 (16.1) voltage withstand volts dc 1000 jacket spark volts rms 3000 peak power kw 2.5 attenuation vs. frequency (typical) attenuation (db per 100 feet) 100.0 10.0 1.0 10 100 1,000 10,000 lmr 600 LMR-200 environmental specifcations performance property 0 f o c installation temperature range -40/+185 -40/+85 storage temperature range -94/+185 -70/+85 operating temperature range -40/+185 -40/+85 calculate attenuation = (0.320900) ? fmhz + (0.000330) ? fmhz (interactive calculator available at http://www. timesmicrowave.com/cable_calculators) attenuation: vswr=1.0; ambient = +25c (77f) power: vswr=1.0; ambient = +40c; inner conductor = 100c (212f); sea level; dry air; atmospheric pressure; no solar loading frequency (mhz) frequency (mhz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 attenuation db/100 ft 1.8 2.3 4.0 4.8 7.0 9.9 12.9 14.2 15.0 16.9 26.4 attenuation db/100 m 5.8 7.5 13.1 15.9 22.8 32.6 42.4 46.6 49.3 55.4 86.5 avg. power kw 1.02 0.79 0.45 0.37 0.26 0.18 0.14 0.13 0.12 0.11 0.07
(800) tms-coax ? www.timesmicrowave.com 14 times microwave systems lmr ? -200 flexible low loss communications coax LMR-200 connectors inner outer finish* part stock vswr** coupling contact contact body length width weight interface description number code freq. (ghz) nut attach attach /pin in (mm) in (mm) lb (g) bnc male straight plug tc-200-bm 3190-225 <1.25:1 (2.5) knurl solder crimp s/g 1.7 (43.2) 0.56 (14.2) 0.045 (20.4) mini-uhf straight plug tc-200-muhf 3190-444 <1.25:1 (2.5) knurl solder crimp ng 1.1 (27.9) 0.45 (11.4) 0.015 (6.8) n male straight plug ez-200-nm 3190-1475 <1.25:1 (8) knurl spring fit crimp s/g 1.5 (38.1) 0.75 (19.1) 0.073 (33.1) n male straight plug ez-200-nmh-d 3190-1918 <1.25:1 (8) hex/knurl spring fit crimp a/g 1.5 (38.1) 0.75 (19.1) 0.073 (33.1) n male straight plug tc-200-nm 3190-224 <1.25:1 (2.5) knurl solder crimp s/g 1.5 (38.1) 0.75 (19.1) 0.073 (33.1) n male reverse polarity tc-200-nm-rp 3190-959 <1.25:1 (2.5) knurl solder crimp n/g 1.5 (38.1) 0.75 (19.1) 0.073 (33.1) sma male straight plug tc-200-sm 3190-612 <1.25:1 (8) hex solder crimp ss/g 1.0 (25.4) 0.32 (8.1) 0.015 (6.8) sma male reverse polarity tc-200-sm-rp 3190-327 <1.25:1 (2.5) hex solder crimp ss/g 1.0 (25.4) 0.32 (8.1) 0.015 (6.8) tnc male straight plug ez-200-tm 3190-1266 <1.25:1 (2.5) knurl spring fit crimp s/g 1.4 (35.6) 0.59 (15.0) 0.045 (20.4) tnc male straight plug tc-200-tmc 3190-240 <1.25:1 (2.5) knurl solder clamp s/g 1.7 (43.2) 0.59 (15.0) 0.045 (20.4) tnc male reverse polarity ez-200-tm-rp 3190-792 <1.25:1 (2.5) knurl spring fit crimp a/g 1.4 (35.6) 0.32 (8.1) 0.045 (20.4) tnc female straight jack tc-200-tf 3190-263 <1.25:1 (2.5) na solder crimp n/g 1.3 (33.0) 0.57 (14.5) 0.033 (15.0) tnc female reverse polarity ez-200-tf-rp 3190-793 <1.25:1 (2.5) na spring fit crimp a/g 1.3 (33.0) 0.57 (14.5) 0.033 (15.0) * finish metals: n=nickel, s=silver, g=gold, ss=stainless steel, a=alballoy **vswr spec based on 3 foot cable with a connector pair tc-200-bm tc-200-muhf ez-200-nmh-d tc-200-nm tc-200-nm-rp tc-200-sm tc-200-sm-rp ez-200-tm tc-200-tmc ez-200-tm-rp tc-200-tf ez-200-tf-rp ez-200-nm
(800) tms-coax ? www.timesmicrowave.com 15 times microwave systems part stock type number code description ground kit gk-s200tt gk-s200tt standard ground kit (each) hardware accessories gk-s200tt lmr 600 LMR-200 ct-240/200/195/100 dbt-u cct-01 install tools part stock type number code description crimp tool ct-240/200/195/100 3190-667 crimp tool for lmr-100, 195, 200 and 240 connectors cutting tool cct-01 3190-1544 cable end fush cut tool deburr tool dbt-u 3192-001 removes center conductor rough edges replacement blade rb-01 3190-1609 replacement blade for cutting tool
|
